Tecno B1f 16+1 Flash File Without Password - flashfilegsm.com

 

Hello viewer, In this article, you will learn how to download TECNO B1f 16+1 flash file firmware stock ROM. You can repair your smartphone using our flash file or tools driver. you will find the driver flash tool in our flash file folder in a zip file. If you don’t know how to flash the TECNO B1f 16+1  phone then read our page carefully step by step. and also we will try to help you at our best if you need it.

WHY DID YOU INSTALL THE TECNO B1f 16+1 FLASH FILE?

All smartphones have a Rom inside which has the operating system & related applications installed in it. When these get crashed & attack any virus or cases any software trouble then people need to flash it and rewrite the same stuff which was there when the phone was brought. Technically you need to flash the TECNO B1f 16+1 Flash File ROM to do this. and One advantage of flashing a cell phone is that you need not invest in a brand new phone. if you are flashing a phone you are likely going to a no-contract provider that will help to save your money.

ADVANTAGES OF THIS TECNO B1f 16+1 FLASH FILE

To Unbrick your TECNO B1f 16+1 Device Support Any Jtag Box Like UFI & Easy Jtag Box, Flash This Rom to Upgrade and Downgrade Your Device &  Unroot or Support Multi-Language, Offline Installing Or Flashing Support Multi-Professional Tool Box Dongle Like CM2 Dongle, UMT Dongle, Unlock tool, EFT Tool, MRT Key, Pandora Box, Chimera ETC If Model Supported.

WHAT TYPE’S PROBLEM WILL BE FIXED BY THIS ROM AS WE KNOWN

TECNO B1f 16+1 Suddenly Hang and Restart Problem Will Be Fix, After Flash Dead Hang Logo Blinking Display, After Flash Wrong Firmware Become Dead Show Only SPD Port, Keep Re-Start & Show System Error Massage, Auto Recovery Mode & Auto Fastboot Mode Show Only, System Any Apps has been stopped Error Fix, unfortunately, App has been stopped Apps error fix, Fix privacy protection lock Pattern Pin Password Frp any user lock fix, And Can Fix Any Software issue On your smartphone.

TECNO B1f 16+1 USB DRIVER & FLASH TOOL

Driver & Tools is a kind of system software that is physical hardware in the Operating system or which makes hardware work in OS for the user. Flashing Before Any Smart Phone On your PC You Need to Install First Tools & USB Driver Then Process Installing Firmware. Without Driver, Your Smart Phone Will Not Detect Boot To Your Pc. So Download USB Driver, and Flashing Tool, And Install Them to Your PC for ready Installing Rom.

Also Download: TECNO KC1H 16+1c FLASH FILE (FIRMWARE) WITHOUT PASSWORD

TECNO B1f 16+1 FLASH FILE INFORMATION:

Company: Tecno
Model:  Tecno B1f 16+1
Version: MT6580__TECNO_MOBILE_LIMITED__TECNO_B1f__8.1.0__B1f-F8018I-OGo-210224V138
File Type: Scatter Flash File
Read By: CM2
CPU: MT6580
How To Flash: Use Any Professional Box Watch Video Link
PASSWORD: N/A
Download Link: Click Here To Download

REQUIREMENTS FOR FLASHING TECNO B1f 16+1

Windows PC or Laptop Any OS.
TECNO B1f 16+1  Flash File Firmware.
Latest MTK USB Driver.
Flashing tool & Professional Dongle & Box
A good USB data cable [use the original cable for best performance ]
Need battery backup charge at least 30%)
Team viewer id if need remote help [additional]

HOW TO REMOVE TECNO B1f 16+1 FRP & SCREEN LOCK?

If your device has locked with FRP, Pattern, Pin, Password With Any Lock Then you can remove this firmware also but 95% of Smart Phone Can Possible Without Flashing Any Firmware. You can reset your phone by using recovery mode but some smart Phone is can not format in recovery to reason hard security. we have many types of screen locks remove files uploaded on our site at flashfilegsm.com search your FRP & screen lock remove the file in our website if didn’t found then contact us on our support number to remove any lock.

IF NOT WORK AFTER INSTALLING BY FIRMWARE.

In most cases, if your mobile phone went off suddenly while charging or even simply using, the fault comes 90% from hardware so it can not be working by flashing firmware or some time Emmc or ufs ic fault have in hang logo. auto restart even after flashes same build firmware become dead also. if you face these problems then check your emmc health by any Jtag for confirmation for the issue.

HOW TO FLASH TECNO B1f 16+1

1. Download TECNO B1f 16+1 Flash File, Tools, Driver, Extract All and install Driver
2. Open MTK Flash Tools Folder Run Flash Tool.exe
3. Click Load Scatter Firmware
4. Select Scatter Firmware File From Your Firmware Folder
5. After Load Firmware Hit Star Downloading Button To Flashing Progress
6. Now Power Off Your Android Device And Plug USB Cable With Hold Boot Key
7. Once MTK Android USB is Detected Your PC Flashing Will Start Automatically
8. Now Wait Until 100% And Successfully Installed Firmware is Done.

WARNING!

Before Flashing Take A Backup of Your Personal Data Like photos Videos Music & Apps Etc. After Installing Firmware Your All Personal Data Will Be Erased Permanently From Your Device. and if you Are a Technician We recommend to You Make A Backup of Full Firmware Then Proceed with Any Operation if you get any wrong to happen then you can restore your device.

REQUEST TO OUR VISITOR

If You Found Any Trouble In This Room Please Contact us In Support Number & drop a message in our Whatsapp number. we can help you at our best. If you found Any Dead links please tell us we will update the link as soon as possible. or If you are looking for any Firmware that is not listed on our website, you can request it through the support number.

Reading Information:

PTFN : MediaTek USB Port_V1633 (COM3)
MODE : BOOTROM
PORT : 3
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY [MTK]
BROM : MEID : E862F014D3E2AD26D74349609F714D7A
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SLA : Local Auth 
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x000000FE
AGENT : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 460001154D323645E9C80342CB668B07
DAInf: 4 : 2 : 156
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 150100464536324D4203C8E9078B66CB
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
DRAM : 0x0178
     EMI : DEV : FireFly
     EMI : SRC : preloader_b1_f8018.bin
     EMI : CNT : 0007
     EMI : [00] : ID : 150100513732534D42 : VEN : SAMSUNG   | DEV : Q72SMB : RAM : [ 1.00 GB ]
     EMI : [01] : ID : 90014A483847316505 : VEN : HYNIX     | DEV : H8G1e : RAM : [ 1.00 GB ]
     EMI : [02] : ID : ADDE14A7424AAD : VEN : UNKNOWN   | DEV : §BJ­ : RAM : [ 512.00 MB ]
     EMI : [03] : ID : 150100464E36324D42 : VEN : SAMSUNG   | DEV : FN62MB : RAM : [ 1.00 GB ]
     EMI : [04] : ID : 700100464D41454538 : VEN : KINGSTON  | DEV : FMAEE8 : RAM : [ 1.00 GB ]
     EMI : [05] : ID : 150100464536324D42 : VEN : SAMSUNG   | DEV : FE62MB : RAM : [ 1.00 GB ]
     EMI : [06] : ID : 150100464536324142 : VEN : SAMSUNG   | DEV : FE62AB : RAM : [ 1.00 GB ]
     EMI : Init EMI from PRELOADER
INIT : 0xBC : DRAM [ 0x00000000 :  [ 0 B ] ]
DRAM : DRAM: 0x40000000 [ 1.00 GB ]
     DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info

        EMMC: CID : 150100464536324D4203C8E9078B66CB
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 464536324D42
        EMMC: VEN : SAMSUNG : FE62MB
        EMMC: SNN : 3370715019 ( 0xC8E9078B) , MF : 6/2019

        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : F36F8C8BC774E1453DD56434F7769E0

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM7)
MODE : PRELOADER PORT
PORT : 7

Boot done!

Patch Level    : O11019
Display ID     : B1f-F8018I-OGo-210224V138
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2021-03-05
Build Time     : 24.02.2021
Product Brand  : TECNO
Product Name   : F8018
Product Device : TECNO-B1f
Product Info   : TECNO-B1f
Product Model  : TECNO B1f
Product Manfct : TECNO MOBILE LIMITED
Product Board  : TECNO-B1f
Board Platform : mt6580

MT6580__TECNO_MOBILE_LIMITED__TECNO_B1f__8.1.0__B1f-F8018I-OGo-210224V138__O11019__TECNO-B1f

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : persist.img
ExtSparse : Compression ratio : 92%
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : odmdtbo.img
Read : vendor.img
ExtSparse : Compression ratio : 20%
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 18%
Read : cache.img
Read : userdata.img

FW Size  : 1.46 GB
Android Info saved : _Android_info.txt
Scatter  : MT6580_Android_scatter.txt
Saved to : C:\Users\Arif\Desktop\MT6580__TECNO_MOBILE_LIMITED__TECNO_B1f__8.1.0__B1f-F8018I-OGo-210224V138__O11019__TECNO-B1f\

Done!
Elapsed: 00:06:39